Tips For Replacing a Window Handle
It is simple to change your window handle in the at-home comforts of your home. Use these helpful tips to ensure smooth operation and a stunning appearance.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Then, measure the length of the spindle to ensure you get the right size replacement.
1. Take a measurement of the length of the Spindle.
It is essential to have the right size spindle when replacing a window handle. This is because it could affect how tight or loose the handle is and whether it locks correctly within the frame of the window. The spindle is a metal shaft that connects the handle and the lock inside the window frame. The spindle is available in either the standard 8mm cross-section for industry or older 9mm versions. upvc door handles is 8mm but this wasn't always the case. When buying a new handle it is important to check the dimensions.
Remove the handle. This is done by turning the handle to the open position and unscrewing two screws that hold the handle in place (which are usually concealed behind plastic caps that will need to removed). Once the handle has been removed, measure the distance from the base to the point at which it ends. This will give you the measurement needed to buy a replacement.
There are plenty of choices when it comes to choosing the right window handle from sleek chrome that can fit into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail locks! The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are generally installed to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm up to 62mm. Window handles made of Cadenza are a different size again because they feature an angled blade that functions an interlocking mechanism that is multi-point inside the window.
Another factor when choosing a new window handle is determining what hand you require, this is simply defined by the hand you use to open the door. Inline Espag window handles aren't handed and can be utilized on either left or right handed windows. Cranked window handles are hand-operated and can only be used on windows that open in only one direction.
2. Take the handle off
The handle may be damaged or worn out, a window handle that falls off can be a real pain. The good news is, you can fix a uPVC handle by yourself. You'll need only some basic hand tools as well as some time to complete this process.
First of all, you have to open the window and ensure that it is in an unlocked position. Then, you need to remove the screws that hold the handle in position. After these have been removed, you can start to work on removing the handle itself.
The handle itself is fixed to a spindle inside the window frame. Depending on the type it is held in place either by a screw or a pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both types of handles can be found on casement windows, as well as aluminium ones. You can lock the handles with a key to block access by unauthorised persons from the outside. You can also lock the handles by turning them clockwise.
To take the handle off, you will need to use an screwdriver with a flat blade in order to remove the clip that holds the handle in place. When this clip is released the handle will fall off the spindle. After the handle has been removed, you'll have to determine the length of the spindle in order to ensure that your new handle is compatible with this size.
Once you have the correct size, you are able to screw the new handle in the correct position. It is important to ensure that the handle is securely attached and that it is rotating in the proper direction (clockwise when the handle is open and counterclockwise if handle closes). It is essential to make sure that the handle has not been placed upside down.
Replace the cap screws. Once you've completed this step, you can test the handle to be sure it is working correctly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked and then back.
3. Take off the Screws
A uPVC handle is an essential part of any house and is the first thing that shows signs of wear or damage. It can be caused by natural elements or by frequent use, and sometimes intentional damage caused by criminals who may want to open a closed window and gain access to your home. However, a simple repair can easily solve the problem and prevent the issue from happening again.
uPVC handles may also be difficult to remove when the locking mechanisms aren't working correctly. It is often possible to fix the problem by replacing the multipoint locking mechanism instead of the whole handle. This could save you money.
After removing the old handle, you'll have to remove the screws that held it in place. They are usually located on the inside of the handle base. You may require an screwdriver to do this, and it's essential to not over tighten the screw as this could cause the handle to become loose.
Then, you'll have to locate the pins or screws that keep the handle in place. Again these are likely to be located on the inside of the base of the handle. you'll need an screwdriver or a pair of pliers to take them off the screws. After they've been removed, you'll need to replace the screw caps in the event that you want to do so, and then test the new handle to ensure it's functioning properly.
When you're ready to install the new handle, simply align the spindle with the cut out in the window mechanism and screw in place. If you want to replace the screws make sure that the handle is in a slack position and any screws are securely attached. Once you've completed this, you're done and can enjoy your newly replaced window handle. We hope this will allow you save money on window and door replacements in the future. Contact us if you require more information about this or any other aspect of your uPVC window.
4. Fit the New Handle
The process of replacing a broken window handle or updating it is simple and can be accomplished in only a few simple steps. Identifying the kind of window handle, determining its spindle length and knowing what tools you'll require to complete the task are key. Always ensure security when working with windows and tools. Be sure to follow the steps and ensure that you have the right handle for use.
The first step is to find the screws holding your existing window handle in place. Then, remove them, while keeping an appropriate grip on the handle itself to prevent it from crashing and causing injury. After the screws have been removed, you can put them in a secure location to be replaced later.
Once the old handle is removed, you can now begin to fit your new one. It is essential that the handle fits perfectly to ensure it is functional and secures the window in place. Then move the metal bar that is square on the handle into the hole in the window mechanism.
The final step is to replace the caps on the screws and test the handle to ensure that it works. If you are not satisfied with the result or the window doesn't shut or open properly Contact our experts for assistance.
Most homes in the UK have uPVC windows and as they are, a lot of them will require to be replaced in the near future due to damage or wear. The process is relatively straightforward and can be carried out by anyone with a little knowledge of DIY. The most crucial aspect to the success of this procedure is to ensure that you're using a handle that is compatible with your existing window in terms of dimensions and style. Contact our team if you aren't sure of the kind of handle that you need. They will be able guide you through all the possibilities.